Spin Tear & Trim — Mechanical Rubber Deflashing, No Nitrogen Needed
The CryoNet Spin Tear-Trim machine is a simple and cost-effective method of deflashing small to medium sized rubber parts. Use it as a standalone process, or as a cost-reducing first stage before cryogenic deflashing for parts with excessive flash. Completely indigenously built, Made in India.
Why Spin Tear & Trim
A very compact, quick and affordable way to mechanically deflash rubber parts — with a fast payback and improved finish quality.
- An affordable system of mechanically deflashing rubber parts that provides quick pay back and improved finish quality
- A very compact and quick solution of rubber deflashing
- A simple method of operation and easy to maintain
- A system that eliminates safety risk and reduces time taken with manual deflashing and cleaning
Features
- High quality and performance PLC, HMI and VFD controls with 7” colour touch screen for ease of usage
- No freezing and no need for liquid nitrogen — runs only on electricity, keeping running costs very low
- Divided drum for filling and working, providing for continuous automatic operation
- Automatic self-lubrication system for non-stop trimming
- High power, high speed motor with speeds up to 6000 RPM for reliable performance
- Insulated for sound reduction
- Built-in safety features and interlocks
Operation Principle
A quick, reliable process that needs minimal operator skill.
Parts are placed into the top compartment of the drum
Once process settings are made, an internal mechanically propelled disc spins the rubber parts at high speed
The resultant centrifugal force causes the rubber products to constantly collide, separating edges and parts from each other
The small flash is sucked away by an integral suction; deflashed parts and larger flash exit via a chute into a bin or separator unit
The separator has perforated sheets of differing hole sizes (6–32mm), set up per product to separate parts from flash
This saves labour time and cost in sorting, and stays compact, efficient and simple to operate
Technical Details — STT 5 Deflashing Equipment
| External dimension | 1500mm (L) × 640mm (W) × 1000mm (H) |
| Weight of unit | 300 Kg approx. |
| Power supply | AC 440V, 50Hz, 3-phase |
| Electrical capacity | 5.5 kW |
| Disc speed | 600 – 6000 rpm |
| Cycle time | Programmable (30 – 240 seconds) |
| Barrel capacity | 3 kg max |
| Air supply | 85 PSI max pressure |
| Operation mode | 7” touch screen |
| Certification | CE certified for high safety standards |
Available in 2 sizes: Drum Ø350mm and Drum Ø500mm.
Want to Trial the Spin Tear & Trim on Your Parts?
Send us your component and flash details — we'll confirm the right drum size and run a trial before you decide.
Ready to cut your manual deflashing time?
Send us your component and flash details — we'll recommend the right drum size and run a trial before you decide.